HYVA Gear Pump NPH

Operating pressure up to 290 bar (short-term pressure up to 325 bar)
Trouble-free operation at low temperatures (oil temperature from -25 ° C to +80 ° C)
Robust, cast housing with reinforced bearings and forced lubrication
High pressure at low speeds
The rotating parts and the drive shaft are made in one unit, which reduces pressure surges to a minimum
Rotation in both directions. The customer does not need to keep two different left and right rotation pumps in stock. The same double rotation pump can be used depending on the connection
Possibility of supplying hoses from the side or rear. Ease of installation
Special material steel bushings provide a robust design, so the gap between the gear teeth remains unchanged, which ensures that the declared performance is maintained.
The special bearing is resistant to axial and radial loads and allows a torque transmission of 300 Nm
The presence of a drainage chamber in the pump housing, due to which excess oil is removed from the splined shaft
The pumps are available in a range of connection standards: ISO 4H (four holes), UNI 3H
The pumps are designed in such a way that they can work in an aggressive environment when installed on a chassis or tractor
Specific power kW / kg: 1.8 to 2.5